Request Quote
Home / Sourcing Guides / 2026-11-20 · 5 min read

Loose Diamonds Marquise

Loose Diamonds Marquise

OpalCraft marquise lab diamonds: CVD and HPHT specs, ratio control, IGI/GIA grading and custom cut supply for B2B buyers.

For tailored OEM specifications and direct mill quotations, explore Loose CVD & HPHT Lab-Grown Diamonds Custom Cut.

Sourcing loose diamonds marquise for fine jewelry programs

For wholesalers, private-label brands and workshop buyers, loose diamonds marquise are a precision purchase, not a generic parcel purchase. The elongated outline magnifies small errors: a slight ratio shift changes the silhouette, an uneven shoulder creates asymmetry in a setting, and a weak tip is vulnerable during mounting. OpalCraft supplies Loose CVD & HPHT Lab-Grown Diamonds for repeat B2B programs where each lot must match the approved master stone in size, ratio, colour and light behaviour, whether the stones are destined for solitaires, halos, east-west rings or matched earrings.

Why marquise calibration matters more than shape alone

Two stones listed at the same carat weight can look noticeably different on the hand. Length-to-width ratio is the controlling specification. OpalCraft works to a standard ratio range of 1.75 to 2.25, with most commercial programs targeting 1.90 to 2.05 for a balanced, elongated appearance without an overly narrow centre. Calibrated sizes are cut to a dimensional tolerance of ±0.05 mm on length and ±0.03 mm on width for melee and small sizes, and ±0.07 mm on length for certified singles above 1.00 ct. That discipline keeps pairs and layouts interchangeable.

Ratio, bow-tie and tip integrity

Buyers should specify more than ratio. Table percentage is held at 55% to 62% and total depth at 58% to 66% in the standard specification, with girdle described as thin to slightly thick and polish and symmetry graded Very Good to Excellent for certified stones. These ranges help limit an excessive bow-tie while preserving brightness across the centre. Tips are inspected under 10x magnification for chips, asymmetry and overly sharp points. For rings, OpalCraft recommends confirming V-prong or tip-protection requirements in the tech pack, because the setting design should be agreed before cutting, not after delivery.

OpalCraft specification control for custom programs

Programs that need a non-standard ratio, a matched suite, or a consistent supply for a private-label collection can use Loose CVD & HPHT Lab-Grown Diamonds Custom Cut to lock the specification before production. The order sheet records target dimensions in millimetres, ratio tolerance of ±0.05, colour and clarity range, fluorescence limit, and whether stones must be matched by shade within a lot. For Loose CVD & HPHT Lab-Grown Diamonds supplied as melee, sorting is by 0.25 mm size brackets and by colour band, so setters receive parcels that do not require resorting on the bench.

SpecificationStock ProgramCustom Cut
Size range3.00 x 1.50 mm to 12.00 x 6.00 mm; 0.10 ct to 3.00 ct singlesBuyer-defined dimensions, tolerance ±0.03 to ±0.07 mm
Ratio1.75 - 2.25, target 1.90 - 2.05Fixed ratio, tolerance ±0.05
Colour / ClarityD to H, VS1 to SI1; EF / VVS available on requestSingle grade or tight range per lot
Cut qualityTable 55-62%, depth 58-66%, polish VG-EXConfirmed against approved master stone
CertificationIGI Certified, GIA Graded for certified singlesIGI or GIA as specified in inquiry

Neither growth method should be specified by habit. The right choice depends on size, colour target and matching requirement.

CVD: Often selected for larger certified singles and for programs prioritising D to F colour consistency across repeat orders. HPHT: Often selected for melee parcels and smaller calibrated sizes where tight size sorting and lot uniformity are the priority. Mixed programs: State clearly if CVD and HPHT stones may be mixed in one parcel. If they must be kept separate, require separate labelling by lot.

In every case, OpalCraft identifies growth method on the lot documentation. That traceability matters for retailers who disclose origin method in their own product records and for brands operating under ISO 9001 quality systems and RJC Compliant sourcing policies.

Inspection, sampling and documentation

Certified singles are checked stone by stone against their report: dimensions, colour, clarity, polish, symmetry and fluorescence are verified before packing, and the report number is matched to the stone inscription where applicable. For melee parcels, OpalCraft applies AQL 2.5 sampling at General Inspection Level II for dimensional and visual checks, with 100% screening under 10x for chipped tips, gross inclusions and out-of-ratio stones. Lots that fail the ratio or tolerance check are resorted, not blended into the next parcel. Each shipment includes a packing list by size, ratio band and lot, so incoming QC at the buyer can sample against the same criteria instead of redefining them.

Stock supply, MOQ and lead time

The standard MOQ is 5 Carats Melee / 1 pc Certified Loose, which allows a brand to trial a size or ratio with a single certified stone before committing to a layout or a full suite. Stock orders are dispatched in 48 Hours Stock timing, subject to final QC and document matching. Custom cut orders are planned on a 10 Days Custom Cut schedule after specification and, where required, master-stone approval are confirmed. Lead time should be confirmed for matched pairs and suites, because matching for colour and ratio takes longer than supplying a single size from stock. When you source loose diamonds marquise on a repeat basis, reserve the same ratio band in your reorder specification to avoid visible drift between production runs.

What to include in your inquiry

A complete inquiry shortens sampling and prevents the most common marquise errors: correct carat weight but wrong visual length.

Target dimensions in mm, carat weight, and required ratio with tolerance Colour, clarity, fluorescence and cut-quality range CVD, HPHT, or either, and whether lots must remain separate Certification requirement: IGI Certified, GIA Graded, or uncertified melee Quantity, matched-pair or suite requirement, and setting type

Send those details to OpalCraft to request a tailored factory quote via inquiry for stock loose diamonds marquise or for a custom cut

Fancy Shapes

Fancy Shape Certified Loose Diamonds

View Specifications
4-Hour Export Desk Response · NDA Protected

Request Factory Pricing & Sample Lead Time

Receive itemized spec sheets, sampling schedule, and tiered EXW/FOB/DDP pricing within 4 business hours.

  • Direct Export Email: [email protected]
  • WhatsApp Desk: +8613205717266
  • Minimum Order (MOQ): 5 Carats Melee / 1 pc Certified Loose
  • Dispatch & Cut Schedule: 48 Hours Stock · 10 Days Custom Cut
  • Cutting Facility: Zhengzhou High-Tech Diamond Industrial Zone, Henan, China
  • Technical Documentation: Download OEM Spec Sheet (PDF)
Direct Factory Quotation Desk · No Public Retail Pricing
Tiered factory quote provided within 4 business hours
Inquiry registered. Reference ID: . Our export desk will send your itemized specification sheet and factory-direct quotation shortly.

We use essential cookies to keep inquiry forms reliable and protect buyer submissions. Read our Privacy & NDA Policy.